Fuel/Oil Filter Adapter for Spin-On Element
SKU:
$95.27
$92.20
$92.20
per item
***As of 07 Oct 2022, 12 sets in stock******
Are you tired if fighting with that stock fuel filter?
Not getting enough fuel flow for your hi performance engine?
This adapter is designed to handle high fuel flow.
The filter can be located on the suction or pressure side of the pump.
Continuously filters fuel in a recirculating system.
The spin-on element is easily replaced on the trail or track with no tools.
This billet adapter is made by Trusted Design Services, LLC of Bandera County, TX.
Made from solid 6061-T6 aluminum barstock.
The mounting pattern is 2" center to center using 2ea 5/16 bolts.
The adapter measures 2.8" x 3.4" x 1.1" thick, and milled on every side to ensure perfect fit and function.
The filter nipple is steel and is assembled using Loctite and a peen at the base of the thread (as shown).
Threaded on both ends to accommodate flow in either direction.
See note on returns below.
Benefits:
Works on pressure or suction side of pumps
Fits many different filter brands/models
Low flow resistance, 3/8" nominal hose size.
Larger fittings and passages than inline filters
Much larger contaminant holding capacity
Please check for clearance in your application before purchasing.
The following items are included in the kit:
1ea Filter Adapter
2ea 5/16" x 1" hex head bolt, Gr5 zinc plated alloy
2ea -6 AN x -6 SAE oring boss steel fitting with oring
Fuel filters that will fit this housing:
NAPA 3386 - as shown in the engraving
WIX 33386
Baldwin BF954
Baldwin BF7967
Donaldson P550057
Oil filters that will fit this housing:
NAPA 1394
Baldwin B33
Fram PH4967
Mobil M1-103
STP S4967
Returned or cancelled items are subject to withholding shipping and processing fees.
Free shipping to US48
Made from solid 6061-T6 aluminum barstock.
The mounting pattern is 2" center to center using 2ea 5/16 bolts.
The adapter measures 2.8" x 3.4" x 1.1" thick, and milled on every side to ensure perfect fit and function.
The filter nipple is steel and is assembled using Loctite and a peen at the base of the thread (as shown).
Threaded on both ends to accommodate flow in either direction.
See note on returns below.
Benefits:
Works on pressure or suction side of pumps
Fits many different filter brands/models
Low flow resistance, 3/8" nominal hose size.
Larger fittings and passages than inline filters
Much larger contaminant holding capacity
Please check for clearance in your application before purchasing.
The following items are included in the kit:
1ea Filter Adapter
2ea 5/16" x 1" hex head bolt, Gr5 zinc plated alloy
2ea -6 AN x -6 SAE oring boss steel fitting with oring
Fuel filters that will fit this housing:
NAPA 3386 - as shown in the engraving
WIX 33386
Baldwin BF954
Baldwin BF7967
Donaldson P550057
Oil filters that will fit this housing:
NAPA 1394
Baldwin B33
Fram PH4967
Mobil M1-103
STP S4967
Returned or cancelled items are subject to withholding shipping and processing fees.
Free shipping to US48
