Do you want to move that unsightly hydroboost unit from the firewall on your custom machine?
The Hydroboost relocation kit by Trusted Design Services, LLC is a precision fabricated system that works with an off-the-shelf slave cylinder, engineered for the DIY mechanic that will save you up to $1,000 compared to other available products.
This kit is designed to remote mount the hydroboost unit and master cylinder.
Mount the unit anywhere space allows and run a single hydraulic actuator line to it, just like a hydraulic clutch.
The mounting feet provide 1" of clearance under the unit as positioned in the factory orientation.
For hot rods, rat rods, crawlers and buggies.
About the kit
This kit is made by Trusted Design Services, LLC in San Antonio, TX.
The Adapter and Flange are made from solid 6061-T6 aluminum barstock.
The mounting feet are made from 11ga A-36 cold rolled steel.
Please check for clearance in your application before purchasing.
The steel feet allow 1" clearance under the unit when sitting on a flat surface.
The following items are included in the kit:
1ea, master cylinder mounting foot - bare steel
1ea, adapter mounting foot - bare steel
1ea, hydroboost adapter - anodized aluminum
1ea, retaining ring - steel
1ea, slave cylinder adapter flange - anodized aluminum
2ea, 5/16-18 x 1-1/4" long hex bolts - zinc plated GR5
Additional items needed, not included in this kit:
1ea, hydroboost unit
1ea, slave cylinder, Dorman p/n CS37793 from Amazon or similar
See photos for assembly procedure.
Free shipping "US48"
taxable in Texas
The Hydroboost relocation kit by Trusted Design Services, LLC is a precision fabricated system that works with an off-the-shelf slave cylinder, engineered for the DIY mechanic that will save you up to $1,000 compared to other available products.
This kit is designed to remote mount the hydroboost unit and master cylinder.
Mount the unit anywhere space allows and run a single hydraulic actuator line to it, just like a hydraulic clutch.
The mounting feet provide 1" of clearance under the unit as positioned in the factory orientation.
For hot rods, rat rods, crawlers and buggies.
About the kit
This kit is made by Trusted Design Services, LLC in San Antonio, TX.
The Adapter and Flange are made from solid 6061-T6 aluminum barstock.
The mounting feet are made from 11ga A-36 cold rolled steel.
Please check for clearance in your application before purchasing.
The steel feet allow 1" clearance under the unit when sitting on a flat surface.
The following items are included in the kit:
1ea, master cylinder mounting foot - bare steel
1ea, adapter mounting foot - bare steel
1ea, hydroboost adapter - anodized aluminum
1ea, retaining ring - steel
1ea, slave cylinder adapter flange - anodized aluminum
2ea, 5/16-18 x 1-1/4" long hex bolts - zinc plated GR5
Additional items needed, not included in this kit:
1ea, hydroboost unit
1ea, slave cylinder, Dorman p/n CS37793 from Amazon or similar
See photos for assembly procedure.
Free shipping "US48"
taxable in Texas
